JDB-P Oiles wear plates is made of bronze or steel base material with graphite inlaid.It’s also called oiles guide bar, oiless bronze plates and etc.
Standard material: CuZn25A16Fe3Mn3 + Graphite;
Other customized material can be made based on customer’s requirement.
● Have Incomparable performance under a high load, low speed operation. Also perform well without lubrication;
● Excellent wear resistance in such places where an oil film is difficult to be formed due to reciprocating, oscillating motions and frequently intermittent operations;
● Remarkable resistance to corrosion and resistance to chemical attack;
● Maintenance free and save operating cost.
● All standard wear plates sizes are available.
● Special L shape, T shape or any other customized shape can be made based on customer requirement.
● Standadrd high tensile brass or Other material can be made based on your requirement.
JDB-P oiles wear plates is widely used for mould industry, hydraulic machine and etc.
| Technical Data | |||||
| Material | Brass | Bronze | Bronze | Bronze | Bronze |
| CuZn25Al5 | CuSn5Pb5Zn5 | CuAl10Ni5Fe5 | CuSn12 | CuSn10Pb10 | |
| Density | 8 | 8.9 | 7.8 | 8.9 | 8.9 |
| Yield pointN/mm2 | ＞450 | ＞90 | ＞260 | ＞150 | ＞100 |
| Tensile strengthN/mm2 | ＞750 | ＞200 | ＞600 | ＞260 | ＞210 |
| Elongation % | ＞12 | ＞15 | ＞10 | ＞8 | ＞8 |
| Hardness HB | ＞210 | ＞70 | ＞150 | ＞95 | ＞75 |
Copyright ? Jiashan PVB Sliding Bearing Co., Ltd. All Rights Reserved | Sitemap Technical Support: 
